The Shaker MDF Half Wall Panelling Kit brings quintessential style to interiors in a petite profile.
This half wall panelling features the hallmarks of timeless shaker design - wide, substantial MDF boards with characteristic rectangular recessed centres. The perfect traditional statement made intimate.
With its clean lines and simplicity, the classic shaker panelling brings heritage charm to living spaces and dining rooms without overwhelming. Installed halfway up your walls, it leaves room for your creativity and complementing decor.
Constructed from durable, moisture resistant MDF, it can be painted or finished to match your style.
If you prefer a larger profile with scaled-up proportions, see the Full-Wall Shaker MDF Wall Panelling Kit.
Finishes available:
- Unprimed - raw MDF finish, no primer or paint applied whatsoever
- Primed - single layer of primer is applied and sanded
- Undercoated - a single layer of primer is applied and sanded, then a single layer of undercoat is applied and sanded (just needs your final top coat)
- Matt Grey - the boards are treated as our undercoated option, then our Matt Grey finish is applied to the board (ready to fit, no top coat required)
Included in the kit:
- 1 x Ogee 2 MDF Dado Rail (70mm x 25mm x 3050mm)
- 2 x Square MDF Panelling Strip (70mm x 9mm x 3050mm)
- 3 x Square MDF Panelling Strip (70mm x 9mm x 950mm)
- 1 x Square MDF Panelling END Strip (70mm x 9mm x 950mm)
Purchasing 1 of these panelling kits will enable you to cover an approx. area of 3.6 square metres (H - 1.2m, W - 3m) provided you use similar measurements and layout to our guide picture.
This panelling kit includes just 1 end strip to finish of the panelled area. No matter whether you order 1 kit or 20 kits - only 1 end strip will be included.
All lengths are supplied completely square and feature no angled cuts - this must be done upon installation if required.
